What we build: BuildingBoat display stands for LEGO building kits
A display stand for LEGO models has one job: hold a finished build at an angle where the detailing is actually visible. We build ours from the same ABS bricks as the sets they carry, so a BuildingBoat stand reads as part of the model rather than a plastic shelf under it. Each stand is cut to one specific set — 75192, 75389, 75394, 75357 — and the geometry is tested against that set before the mould is signed off.
The rest of the yard is scene kits. A greenhouse with transparent walls and an LED, a nutcracker with a tree that lights up, two troop carriers with hidden wheels. They are built from the same bricks, they take the same minifigures, and they sit on the same shelf as the stands. Pick a shelf below and the whole range opens up.
Three shelves in the yard
Lantern DeckThe two sets we build with a light inside.
SlipwayTwo rolling carriers with hidden wheels, figure racks and weapon racks.
Mast MountsThree BuildingBoat display stands for LEGO building kits, each cut for a named set.Everything on the shelf right now
Seven models, all in stock, all shipped by the partner store.
Lantern Deck
Flower House Greenhouse Set with LED Light
4.5 722 builder notes
$28.78
Lantern Deck
Christmas Nutcracker Kit with LED Tree
4.5 213 builder notes
$29.99
Slipway
Clone Platoon Attack Craft with 32 Soldiers
4.5 421 builder notes
$18.80
Slipway
Trade Federation Droid Multi Troop Transport
4.4 168 builder notes
$56.50
Mast Mounts
Vertical Display Bracket for LEGO 75192 Millennium Falcon
4.4 1,765 builder notes
$39.98
Mast Mounts
Imperial Aircraft Stand for LEGO 75394 and 75357
4.5 147 builder notes
$15.33
Mast Mounts
Vertical Falcon Bracket for LEGO 75389
4.4 90 builder notes
$14.56
Why a brick stand beats a plain acrylic plate
Clear acrylic display cases protect a build from dust, and nothing we make replaces them. What acrylic cases do badly is attitude: a flat base leaves a starship sitting level, like a model on a table. Our angled stands tilt the hull, lift the nose and put the underside on show — the part a builder spent two evenings detailing.
The brackets are weighted at the base and locked with a link-and-lock column, so a heavy UCS hull stays where it was put. Nothing is glued, nothing is drilled, and the model comes off the stand as easily as it went on.
Lit scenes that keep a desk warm
Two of our sets ship with an LED inside. The flower house is assembled mostly from transparent parts, so the light spills through the walls and the greenhouse glows from the inside out. The nutcracker hides its LED in the Christmas tree: hold the tree, twist it, and the whole scene turns warm.
Both are sized for a desk rather than a display cabinet — 6 to 9 inches across — and both arrive in a printed gift box.
What arrives in the box
Bags are numbered in build order, the instruction book is printed in colour, and spare bricks for the small parts are in the last bag. Our stands carry no stickers at all: the colour is in the plastic, so a stand built today looks the same in five years.
Not sure where to start?
Pick the line that sounds like you.
Each stand is cut to one set number. Match the number on your box and the model sits at an angle that shows the detail.
Open the shelfI want a gift with a light in itLantern Deck2 lit scenes, $28.78 to $29.99A greenhouse and a nutcracker tree, both with an LED inside. An evening of building, then a lamp for the desk.
Open the shelfI want something to build and swooshSlipway2 craft, $18.80 to $56.50Troop carriers and attack craft that take minifigures and roll on hidden wheels.
Open the shelfThe whole yard on one table
Seven models, one grid: pieces, footprint, age and price, grouped by shelf.
| Set | Shelf | Pieces | Size | Ages | Rating | Price |
|---|---|---|---|---|---|---|
| Flower House Greenhouse | Lantern Deck | 597 | 6.3 × 6.3 × 6.3 in | 8+ | ★ 4.5 | $28.78 |
| Christmas Nutcracker | Lantern Deck | — | 8.8 × 4.9 × 8.9 in | 8+ | ★ 4.5 | $29.99 |
| Clone Platoon Attack Craft | Slipway | — | — | 6-12 | ★ 4.5 | $18.80 |
| Droid Multi Troop Transport | Slipway | 1286 | — | 12+ | ★ 4.4 | $56.50 |
| Vertical Bracket for 75389 | Mast Mounts | 216 | 9.3 × 8.5 × 9.0 in | 6+ | ★ 4.4 | $14.56 |
| Imperial Aircraft Stand | Mast Mounts | 172 | 8.5 × 5.9 × 3.8 in | 6+ | ★ 4.5 | $15.33 |
| Vertical Bracket for 75192 | Mast Mounts | 408 | 17.7 × 11.8 × 7.1 in | 10+ | ★ 4.4 | $39.98 |
Three steps from the box to the shelf
- 1
Pick a set
Find the stand for your model number, or a lit kit that fits the shelf you have.
- 2
Open the numbered bags
Bags go in build order and the colour instruction book is printed, not a link.
- 3
Clip it in
Stands clip into the model you already own. No glue, no stickers, no tools.
What builders wrote about these sets
Worth it, with some caveats
The stand works well for the Star Destroyer, but was somewhat difficult to put together. Some pieces are very tight and required me to push against a hard surface to fit. The instructions were also a bit confusing, but overall was worth the price paid.
Huge hit.
Was given as a gift and I had a chance to see it in person, it is better than what I thought in person. Opening windows, cute details inside and out. This brought a huge smile to her face, when she was discussing it and showing me.. Worth every penny.
Can’t beat it for the price. Great set with Quality plastic bricks very similar to Lego. If you are on the fence it is 100% worth buying over any overpriced Lego set. No missing parts or issues and easy to follow instructions.
Fun to put together!
I bought this for my teenager. It took some time to put together because there are many pieces. But it was fairly easy using instructions and very enjoyable. It became apart of my Christmas decor and is so cute!
Extremely cute and inexpensive!!
LOVED, loved, loved this!! Easy to put together, extremely cute. using as a nite-lite. PERFECT gift. Bought it for a friend I didn't see for Christmas and got to keep it myself- so glad!! Great price too!
The tree lights up!!
I love it! Everything came in separate clearly labeled bags. Instructions were clear. Very easy to build, except for the wreath that kept falling apart. Similar to the name brand but for half the price.
Questions we get at the yard
What is the best way to display LEGO models?
Lift them off the flat. A model standing on its landing gear shows a roofline; the same model on an angled display stand shows the hull, the engines and the greebling underneath. For a shelf with children or pets around, combine the two: an angled stand inside a clear case gives you the view and the dust protection at once.
Are your stands designed for a specific set or universal?
Specific. Each BuildingBoat display stand is cut for one set number — our brackets fit 75192, 75389, 75394 and 75357 — because a universal cradle has to be loose enough to hold anything and ends up holding nothing securely. The set number is in the name of every stand we sell.
Will the stand hold a heavy UCS build?
Yes. The 75192 bracket is 408 pieces with a wide weighted base and a triangular spine, and it has been tested with the full Millennium Falcon hull mounted vertically. The 75389 bracket uses a dual-sided lateral triangle for the same reason.
Do acrylic display cases yellow over time?
Cast acrylic yellows slowly in direct sun; our stands are ABS, which holds colour longer and will not craze. Either way, keep a display out of a south window — ultraviolet light is what ages both materials.
Are the kits easy to put together?
They are built like any brick set: numbered bags, a printed booklet, no tools. Our stands run from 172 to 408 pieces and take under two hours; the 1286-piece troop transport is a weekend build.
A short note on fit, sizes and collections
Everything in this catalogue is compatible with LEGO bricks and nothing in it is made by the LEGO Group — we are an independent yard, and set numbers appear here only to say which model a stand was cut for. Collectors who build Star Wars ships and LEGO Technic chassis buy our brackets to free up shelf depth; families buy the lit sets because they build in an evening.
Most LEGO display stands sold today are a flat acrylic plate with a post. Ours are brick kits with a set number in the name, which is why they showcase a hull instead of parking it. The word premium we would rather earn in the mould and the booklet — numbered bags, colour printing, no stickers — than in a listing photo, and the fans who write to the yard usually already own a shelf of LEGO sets to put ours beside.
If a stand for a set you own is missing from the shelf, write to the yard. Requests are how the last three brackets got designed.